Collection: Products

1. Mount isolation switch to surface and install ground wire, (use M6 or 7/32 screws, not included).
2. Create a slack coil of tracer wire beneath isolation switch.
3. From the slack coil, strip 1” insulation from wire and curl wire around post.
4. To prevent accidental contact with other posts, arrange wire in star pattern and tighten nut with 3/8" wrench until it firmly contacts wire.
5. To operate, turn switch clockwise to isolate tracer wire from ground wire.
6. Turn switch counterclockwise to return wires to bonded position.

To prevent accidental contact with other posts, arrange wire in star pattern and tighten nut until it firmly contacts wire.